I-HDPE HHMTR-144

Incazelo emfushane:

UMarlex Brand
I-HDPE| Ifilimu
Kwenziwe eSaudi Arabia

Inani :1100-1600 USD/MT

Imbobo :Xingang, Qingdao, Shanghai, Ningbo

I-MOQ:17MT

Inombolo ye-CAS:9003-53-6

Ikhodi ye-HS:390311

Inkokhelo :TT, LC

Thumela i-imeyili kithi Landa njenge-PDF

Imininingwane Yomkhiqizo

Izinhlelo zokusebenza

•Ukuqina nokuqina

•Ukucutshungulwa okuhle

•Izici ezinhle zokuhlanganisa nge-HDPE HMW resins

Izicelo ezijwayelekile ze-HHM TR-144 zifaka:

•Izikhwama zezikibha

•Multi-wall liners

•Izikhwama zikadoti

Le resin ihlangabezana nalezi zici:

•I-FDA 21 CFR 177.1520(c) 3.2a

•I-EU No. 10/2011

Ukuze uthole Ishidi Ledatha Yokuphepha Okubalulekile (MSDS), vakashela isayithi lethu ku-www.saudipolymers.com

Izakhiwo Ze-Resin Ezibizayo	Inani (SI Units)	Indlela
Ukuminyana	0.946 g/cm3	I-ASTM D1505
Ncibilikisa Inkomba, Isimo 190°C / 2.16 kg	0.18 g/10 min	I-ASTM D1238
I-Brittleness Temperature, I-clamp yohlobo A, isampula yohlobo I	<-75°C	I-ASTM D746
ESCR, Isimo B (100% Igepal), F50	> 1000 amahora	I-ASTM D1693
I-Flexural Modulus, Tangent - 16:1 span:deep, 12.7 mm/min	1150 MPa	I-ASTM D790
I-Dart Drop (66 cm)	awu 90g	I-ASTM D1709
Amandla Okuqina Ekukhiqizweni, 50.8 mm/min MD	24 MPa	I-ASTM D882
Amandla Okuqina Ekukhiqizweni, 50.8 mm/min TD	26 MPa	I-ASTM D882
Ubude ngesikhathi sekhefu, 50.8 mm/min MD	480%	I-ASTM D882
Ubude ngesikhathi sekhefu, 50.8 mm/min TD	640%	I-ASTM D882
Elmendorf Tear Strength, MD	19 g	I-ASTM D1922
Elmendorf Tear Strength, TD	270 g	I-ASTM D1922

1. Izakhiwo ezivamile ezibikwe lapha zijwayelekile zomkhiqizo, kodwa azibonisi ukwehluka kokuhlola okuvamile ngakho akufanele zisetshenziselwe izinjongo zokucaciswa. Amanani ayindilinga.

2. Izakhiwo ezibonakalayo zanqunywa kumasampula abunjwe ngokucindezelwa ayelungiswe ngokuhambisana neNqubo C ye-ASTM D4703, Isijobelelo A1.

3. Ngokusekelwe kufilimu engu-0.025 mm ekhiqizwe ngo-4:1 isilinganiso sokuqhunyiswa.

Okwedlule: I-HDPE P6006

Olandelayo: I-HDPE 23050