I-HDPE FI0851P

Incazelo emfushane:

Inkampani ye-SABIC

I-HDPE|Ifilimu

Kwenziwe eSaudi Arabia

Inani:1000-1200 USD/MT

Imbobo:I-Huangpu / Ningbo / Shanghai / Qingdao

I-MOQ:1*40GP

Inombolo ye-CAS:9002-88-4

Ikhodi ye-HS:3901200099

Inkokhelo:TT/LC

Thumela i-imeyili kithi Landa njenge-PDF

Imininingwane Yomkhiqizo

Incazelo

I-HDPE FI0851P iyi-resin ye-polyethylene enesisindo esikhulu samangqamuzana eklanyelwe izinhlelo zokusebenza zefilimu.Le resin inesisindo samangqamuzana abanziukusatshalaliswa okwenza kube lula ukucubungula.Amafilimu enziwe ngale resin abonisa ukuqina okuphezulu, umthelela omuhle kakhulu kanye nezici zokuqina.

Amanani Ezakhiwo Ajwayelekile

IZIMPAHLA	IZIMALI EZIJWAYELEKILE	AMANYE	IZINDLELA ZOKUHLOLA
IMPAHLA YEPOLYMER
I-Melt Flow Rate (MFR)
ku-190 ° C no-21 kg	8	dg/min	I-ASTM D1238
ku-190 °C no-2.16 kg	0.05	dg/min	I-ASTM D1238
Ukuminyana
Ukuminyana	0.951	g/cm³	I-ASTM D792
IZIMPAHLA ZEMITHETHO
Ukuhlolwa kwe-tensile
amandla okucindezeleka @ yield, MD	35	I-MPa	I-ASTM D882
amandla okucindezeleka @ yield, TD	30	I-MPa	I-ASTM D882
amandla okucindezeleka @ Break, MD	50	I-MPa	I-ASTM D882
amandla engcindezi @ Break, TD	48	I-MPa	I-ASTM D882
stress Elongation @ Break, MD	490	%	I-ASTM D882
ingcindezi Elongation @ Break, TD	500	%	I-ASTM D882
Elmendorf Tear Strength, MD	17	gf	I-ASTM D1922
Elmendorf Tear Strength, TD	30	gf	I-ASTM D1922
I-Dart Drop Impact	340	g	I-ASTM D1709
IZIMPAHLA ZOKUSHISA
I-Vicat Softening Temperature
I-Vicat Softening Temperature	126	°C	I-ASTM D1525

Izinhlelo zokusebenza

• Isikhwama sokuthenga
• Isikhwama sikadoti
• I-Industrial liner

Izimo Zokucubungula

Izimo ezijwayelekile zokucubungula ze-FI0851P yilezi:

Izinga lokushisa elincibilikayo: 250°C

Izinga lokushisa lesikhunta: 15-60°C

Ingcindezi yomjovo: 600 - 1000 Bar

Isitoreji Nokuphatha

Izinto ze-polyethylene kufanele zigcinwe ngendlela yokuvimbela ukuchayeka okuqondile elangeni kanye/noma nokushisa.Indawo yokugcina impahla kufanele futhi yome futhi okungcono ingeqi ku-50°C.I-SABIC ngeke inikeze iwaranti ezimweni ezimbi zokugcina ezingase ziholele ekuwohlokeni kwekhwalithi njengokushintsha kombala,iphunga elibi kanye nokusebenza komkhiqizo okunganele.Kunconywa ukucubungula i-PE resin phakathi nezinyanga ezingu-6 ngemva kokubeletha.

Umshwana wokuzihlangula

Noma yikuphi ukudayiswa kwe-SABIC, izinkampani ezingaphansi kwayo kanye nezinkampani ezingaphansi kwayo (“umdayisi” ngamunye), kwenziwa ngokukhethekile ngaphansi kwemibandela evamile yokuthengisa yomthengisi (etholakala uma iceliwe) ngaphandle uma kuvunyelwene.kungenjalo ngokubhala futhi wasayinwa egameni lomdayisi.Nakuba ulwazi oluqukethwe lapha lunikezwe ngokwethembeka, UMDALI AKENZI SIQINISEKISO, AYICHAZE NOMA OKUSHIWO,KUHLANGANISA UKUTHENGISA KANYE NOKUKUNGAPHUMULI KWEMPAHLA ENOBUGCISA, FUTHI AKUTHATHI ISIBOPHO, ESIQONDILE NOMA ESINGAPHAMBILI, NGENHLONIPHOUKUSEBENZA, UKUFANELEKA NOMA UKULUNGELA UKUSETSHENZISWA OKUHLOSIWE NOMA INHLOSO YALE MIKHIQIZO KUNOMA YILUPHI ISICELO.Ikhasimende ngalinye kufanele linqume ukufaneleka kwezinto zomdayisi ukuze zisetshenziswe ngokukhethekile yikhasimende ngokuhlolwa nokuhlaziya okufanele.Asikho isitatimende somthengisi esiphathelene nokusetshenziswa okungenzeka kwanoma yimuphi umkhiqizo, isevisi noma umklamo esihloselwe, noma okufanele sihunyushwe, ukunikeza noma iyiphi ilayisensi ngaphansi kwanoma yiliphi ilungelo lobunikazi noma elinye ilungelo lempahla yengqondo.

Okwedlule: I-HDPE Q5502BN

Olandelayo: I-HDPE FI0750