I-LLDPE 222WT

Incazelo emfushane:

Sabic Tianjin
LLDPE| Ifilimu MI=2
Kwenziwe eshayina

Inani :1100-1600 USD/MT

Imbobo :Xingang, Qingdao, Shanghai, Ningbo

I-MOQ:17MT

Inombolo ye-CAS:9003-53-6

Ikhodi ye-HS:390311

Inkokhelo :TT, LC

Thumela i-imeyili kithi Landa njenge-PDF

Imininingwane Yomkhiqizo

Incazelo

I-SABIC 222WT iyi-copolymer ye-ethylene-butene eklanyelwe ukusetshenziswa kwefilimu evuthelwayo. I-222WT inomshini wefilimu osezingeni eliphakeme njengokuqina, ukumelana nokubhoboza kanye namandla aqinile, futhi inendawo yokubeka uphawu enhle kakhulu, i-222WT iqukethe ukushelela okuphezulu kanye ne-antiblock ephezulu.

Izakhiwo

Isikhwama sendwangu, isikhwama sokuthwala, i-coat layer encane, isikhwama semfucumfucu, ukupakishwa kwenyama nokunye ukupakishwa kokudla noma ifilimu ye-lamination, inhloso evamile yokupakishwa kwabathengi njll.

IZIMPAHLA	IZIMALI EZIJWAYELEKILE	AMANYE	INDLELA YOKUHLOLA
IMPAHLA YEPOLYMER
Melt Flow Rate
ku-190°C no-2.16 kg	1.9	g/10 imiz	I-ASTM D1238
Ukuminyana ku-23°C	922	kg/m³	I-ASTM D1505
UKWENZIWA
I-ejenti yokushelela	√	-	-
I-ejenti ye-anti block	√	-	-
IZIMPAHLA ZEMITHETHO
Ukuhlolwa kwe-tensile
ukucindezeleka ngesikhathi sokuvuna, MD	10	I-MPa	I-ASTM D882
ukucindezeleka ngesikhathi sokuvunwa, TD	10	I-MPa	I-ASTM D882
ukucindezeleka ngesikhathi sekhefu, MD	31	I-MPa	I-ASTM D882
ukucindezeleka ngesikhathi sekhefu, TD	23	I-MPa	I-ASTM D882
elongation at break, MD	450	%	I-ASTM D882
I-elongation ngesikhathi sekhefu, TD	600	%	I-ASTM D882
IZIMPAHLA ZOKUBONA
Ukucwebezela
45°	50	-	I-ASTM D2457
Inkungu	16	%	I-ASTM D1003
IZIMPAHLA ZIFILIMU
I-Dart Impact F50	112	g	I-ASTM D1709

(1) Izakhiwo zikalwe ngokukhiqiza ifilimu engu-30 μ ne-2 BUR kusetshenziswa i-100% 222WT.

Izimo Zokucubungula

Izimo ezijwayelekile zokucutshungulwa kuka-222WT yilezi: Izinga lokushisa lomgqomo: 190 - 220°C Isilinganiso sokushisa: 2.0 - 3.0

Ukulawulwa Kokudla

Sicela uxhumane nabadayisi basendaweni / abamele Ubuchwepheshe ukuze uthole imininingwane.

Umshwana wokuzihlangula

Amabanga awahloselwe izicelo zezokwelapha noma zokunakekelwa kwezempilo.

Isitoreji Nokuphatha

I-polyethylene resin kufanele igcinwe ngendlela yokuvimbela ukuchayeka okuqondile elangeni kanye/noma nokushisa. Indawo yokugcina kufanele futhi yome futhi okungcono ingeqi ku-50°C. I-SABIC ngeke inikeze iwaranti ezimeni ezimbi zokugcina ezingase ziholele ekuwohlokeni kwekhwalithi njengokushintsha kombala, iphunga elibi kanye nokungenzi kahle komkhiqizo. Kunconywa ukucubungula i-PE resin phakathi nezinyanga ezingu-6 ngemva kokubeletha.

Umshwana wokuzihlangula

Noma yikuphi ukudayiswa kwe-SABIC, izinkampani ezingaphansi kwayo kanye nezinkampani ezingaphansi kwayo (“umdayisi” ngamunye), kwenziwa ngokukhethekile ngaphansi kwemibandela yokuthengisa evamile yomthengisi (etholakala ngemva kwesicelo) ngaphandle uma kuvunyelwene ngenye indlela ngokubhaliwe futhi kwasayinwa egameni lomdayisi. Ngenkathi ulwazi oluqukethwe lapha lunikezwa okholweni oluhle, umthengisi akenzi siqinisekiso, aveze noma asho, kufaka phakathi noma yisiphi isikweletu, ukuqondisa noma ukungaqondile, maqondana nokusebenza okuhlosiwe noma INHLOSO YALE MIKHIQIZO KUNOMA YILUPHI ISICELO. Ikhasimende ngalinye kufanele linqume ukufaneleka kwezinto zomdayisi ukuze zisetshenziswe ngokukhethekile yikhasimende ngokuhlolwa nokuhlaziya okufanele. Asikho isitatimende somthengisi esiphathelene nokusetshenziswa okungenzeka kwanoma yimuphi umkhiqizo, isevisi noma umklamo esihloselwe, noma okufanele sihunyushwe, ukunikeza noma iyiphi ilayisensi ngaphansi kwanoma yiliphi ilungelo lobunikazi noma elinye ilungelo lempahla yengqondo.

Okwedlule: Idatha ye-LLDPE 218WJ

Olandelayo: LLDPE R546U