Ifilimu ye-SABIC FI0851P HDPE

Isithombe Esivelele Sefilimu ye-SABIC FI0851P HDPE

Incazelo emfushane:

Umkhiqizo we-SABIC

Ifilimu ye-HDPE

Kwenziwe eSaudi Arabia

Intengo:1000-1200 USD/MT

Imbobo:I-Huangpu / Ningbo / Shanghai / Qingdao

I-MOQ:1*40GP

Inombolo ye-CAS:9002-88-4

Ikhodi ye-HS:3901200099

Inkokhelo:I-TT/ LC

Sithumelele i-imeyili Landa njenge-PDF

Imininingwane Yomkhiqizo

Incazelo

I-HDPE FI0851P iyi-resin ye-polyethylene enesisindo esikhulu sama-molecule eyenzelwe ukusetshenziswa kwefilimu ephefumulayo. Le resin inesisindo esibanzi sama-moleculeukusatshalaliswa okwenza kube lula ukucubungula. Amafilimu enziwe ngale resin abonisa ukuqina okuphezulu, umthelela omuhle kakhulu kanye nezici zokuqina.

Amanani Empahla Ajwayelekile

IZAKHIWO	AMANINGI AJWAYELEKILE	AMAYUNITHI	IZINDLELA ZOKUHLOLA
IZAKHIWO ZE-POLYMER
Izinga Lokugeleza Kokuncibilika (i-MFR)
ku-190 °C kanye no-21 kg	8	dg/min	I-ASTM D1238
ku-190 °C kanye no-2.16 kg	0.05	dg/min	I-ASTM D1238
Ubuningi
Ubuningi	0.951	g/cm³	I-ASTM D792
IZINDAWO ZOMKHANIKHANI
Ukuhlolwa kokuqina
amandla okucindezeleka @ yield, MD	35	I-MPa	I-ASTM D882
amandla okucindezeleka @ yield, TD	30	I-MPa	I-ASTM D882
amandla okucindezeleka @ Break, MD	50	I-MPa	I-ASTM D882
amandla okucindezeleka @ Break, TD	48	I-MPa	I-ASTM D882
Ukucindezeleka Okude @ Break, MD	490	%	I-ASTM D882
Ukucindezeleka Okude @ Break, TD	500	%	I-ASTM D882
I-Elmendorf Tear Strength, MD	17	gf	I-ASTM D1922
I-Elmendorf Izinyembezi Amandla, TD	30	gf	I-ASTM D1922
Umthelela Wokudonswa Kwezintuthwane	340	g	I-ASTM D1709
IZINDAWO ZOKUSHISA
Izinga lokushisa lokuthambisa likaVicat
Izinga lokushisa lokuthambisa likaVicat	126	°C	I-ASTM D1525

Izicelo

• Isikhwama sokuthenga
• Isikhwama sikadoti
• I-liner yezimboni

Izimo Zokucubungula

Izimo ezijwayelekile zokucubungula ze-FI0851P yilezi:

Izinga lokushisa lokuncibilika: 250°C

Izinga lokushisa lesikhunta: 15-60°C

Ingcindezi yomjovo: 600 - 1000 Bar

Isitoreji Nokuphathwa

Izinto ze-polyethylene kufanele zigcinwe ngendlela yokuvimbela ukuchayeka ngqo elangeni kanye/noma ekushiseni. Indawo yokugcina kufanele futhi yome futhi kungcono ingadluli ku-50°C. I-SABIC ngeke inikeze isiqinisekiso ezimweni ezimbi zokugcina ezingaholela ekuwohlokeni kwekhwalithi njengokushintsha kombala,Iphunga elibi kanye nokusebenza okungalingani komkhiqizo. Kunconywa ukucubungula i-PE resin zingakapheli izinyanga eziyi-6 ngemuva kokulethwa.

Isihlangululo

Noma yikuphi ukuthengiswa yi-SABIC, izinkampani ezingaphansi kwayo kanye nezinkampani ezisebenzisana nayo (ngamunye “ungumthengisi”), kwenziwa kuphela ngaphansi kwemibandela ejwayelekile yokuthengisa yomthengisi (etholakala uma iceliwe) ngaphandle kokuthi kuvunyelwene ngakho.kungenjalo ngokubhala phansi futhi kwasayinwa egameni lomthengisi. Nakuba ulwazi oluqukethwe lapha lunikezwa ngokwethembeka, uMthengisi akenzi siqinisekiso, esicacile noma esingacatshangwanga,KUFAKA UKUTHENGISWA NOKUNGEPHULWA KWEMpahla YENGQONDO, FUTHI AKUTHATHI NOMA YISIPHI ISIBOPHO, ESIQONDILE NOMA ESINGAQONDI, MAYELANA NEUKUSEBENZA, UKUFANELEKA NOMA UKUFANELEKA KOKUSETSHENZISWA OKUHLOSIWE NOMA INJONGO YALE MIKHIQIZO KUNOMA YILUPHI USEBENZISA. Ikhasimende ngalinye kumele linqume ukufaneleka kwezinto zomthengisi ukuze zisetshenziswe yikhasimende ngokuhlola nokuhlaziya okufanele. Akukho sitatimende somthengisi mayelana nokusetshenziswa okungenzeka kwanoma yimuphi umkhiqizo, isevisi noma umklamo esihloselwe, noma okufanele sihunyushwe, ukunikeza noma yiliphi ilayisensi ngaphansi kwanoma yiliphi ilungelo lobunikazi noma elinye ilungelo lempahla yobuhlakani.

Okwedlule: Ukubumba Okuvuthayo kwe-Lotrene Q5502BN HDPE

Olandelayo: Ifilimu ye-SABIC FI0750 HDPE